Burners

We sell, install, and service gas, propane, oil, and waste oil burners.

Waste Oil Furnaces

The patented technology allows the burning of waste oils regardless of viscosity or flash point. The preheater heats the oil to a temperature where all oils reach the same viscosity. The pump circulates this oil around the heating element through small tubes at a rate of three feet per second. This prevents burning of oil that typically occurs in competitor designs. The burned oil resembles hard black pieces that will block in a nozzle and cause shutdowns.

This system also allows the oil to be preheated to a higher temperature providing two benefits:

• the ability to burn the higher flash point oils like synthetic and vegetable oils and • to burn all of the hydrocarbon molecules in the oils for complete and clean combustion with no smoke. The patented needle assembly seats into the nozzle during each shutdown keeping the oil sealed within the system and keeping the nozzle clean.

Safety has been a critical element in the design of our burners. We use a Fireye industrial rated combustion control suited for the “unpredictable” nature of waste oil. It monitors the flame and delivers the oil only when everything is working properly. Compeititor burners use a combustion control intended for residential fuel oil, which is very “predictable” by comparison. Another strong feature is the ease of servicing our burner. All components are modular in design such that they can be change out easily if there is a failure.

We supply top quality products and services.

Our furnaces are designed to accommodate the easy removal of ash, are constructed of high temperature aluminized and stainless steels, have heavy duty motors to prevent overload conditions, and are finished with an industrial powder coat paint for good appearance and durability.

The entire system is engineered to ease service and maintenance and the instruction manual is written for the novice so that most users can provide their own maintenance but we also service what we sell. The burners come with an optional "perpetual warranty" that provides an annual swap of the module (that contains many of the components that are subject to failure). Furnaces include as standard many of the components needed for a complete installation: a barometric damper, a floating pick-up assembly, a filter and check value, hanging brackets, and a 120-volt wall thermostat.

Safe

• Industrial control • Pre-start self diagnostics • Ultraviolet flame sensor • 4 second flame interruption • 10 second trial for ignition

Clean

• Complete combustion • Filtration of heated oil • Three-pass heat exchanger • Automatic vapor elimination • Swing-out doors for cleaning

Reliable

• Automatic nozzle clean out • Burns most types of used oils • Aluminized & stainless steel • Ceramic target • Oil heated at high velocity

We also supply bench top electric furnaces.

Our furnaces are competitively priced and we deliver efficient, quality service.